Setting Aria SOHO PABX Program (continued)
Following up a previous article for PABX programming soho.example Aria SOHO program demand case (3 CO lines, 8 extensions):1. Phone extension (station) starts from 101-1082. For the incoming call (ring):CO1 = signed / accepted by the auto attendantCO2 = 101.102CO3 = 103,104,105,106,107,1083. For the Outgoing Call:Ext 101 = CO 2, timer 3 minutes, free phone to SLI, long distance, localExt 102 = CO2, free timer, free phone to SLI, long distance, localExt 103 = CO3, timer 3 minutes, free phone to SLI, long distance, localExt 104 = CO3, timer 3 minutes, localExt 105 = CO3, timer 3 minutes, localExt 106 = CO3, timer 3 minutes, localExt 107 = only intercom but, can call out using a password1234, local, timer 3 minutesExt 108 = intercomCompletion:Perform initial settings for programming Aria SOHO
Penomeran station / extension was done during the initialization step-2
For the incoming call (ring):
CO1 = signed / accepted by the auto attendant
CO2 = 101.102
CO1 CO3 = 103,104,105,106,107,108 go to auto attendant:
In PGM 144: CO set a Voice Message to 001 (where 001 = greeting message)
CO2 = 101.102
Change the PGM 144 to CO2 menu:
Set / update / station assign (right-click menu): the contents of the range 101 to 102 for day mode, night mode and the same for.
CO3 = 103,104,105,106,107,108Still from PGM 144 to CO3 menu, same as above set for CO2.Or it could also do penggroupan extensions in PGM 190:
PGM 190: 103,104,105,106,107,108 extension grouped in group 620
And the PGM attributes 144, smear group and content 620.dan cases:
For the Outgoing Call:
Ext 101 = CO 2, timer 3 minutes, free phone to SLI, long distance, local
Ext 102 = CO2, free timer, free phone to SLI, long distance, local
Ext 103 = CO3, timer 3 minutes, free phone to SLI, long distance, local
Ext 104 = CO3, timer 3 minutes, local
Ext 105 = CO3, timer 3 minutes, local
Ext 106 = CO3, timer 3 minutes, local
Ext 107 = only intercom but, can call out using passwords 1234, local, timer 3 minutes
Ext 108 = intercom
From the data obtained:Ext 101 = COS 1Ext 102 = COS 1Ext 103 = COS 1Ext 104 = COS 3Ext 105 = COS 3Ext 106 = COS 3Ext 107 = COS 8Ext 108 = COS 7From PGM 116:Change COS respectively corresponding extension above data, both for fashionday or night.For the timer:PGM attributes set in the station 113.And for the case:Ext 107 = only intercom but, can call out using a password1234, local, timer 3 minutesFor setting the timer at COS and at PGM 116 and 113As for setting the password (Walking COS), open atPGM 227:obtained there are 3 planes (index 4.5, and 6) which can be used for local calls.then the contents of one extension that you want to useCOS as walking.contents in the INDEX 4 password eg 1234.So from extension 108 can use the privilege extention 104COS as walking.For how to use Walking COS:Digital Phone:Press the [Trans / PGM] - Press 2 3 - Enter password - Take the lineand dial no purpose.For SLT Tel:"563" (program code) + "23"And for the distribution of CO line out, from the data:CO1 = only to receive telephone callsCO2 = 101 and 102 only ExtCO3 = Ext 103,104,105,106,107,108Ext 108 is not actually acquired the allocation of CO line because it can onlyintercom, it was ext 107 using the privacy of the extensions 104.In PGM 117 (CO group acces):On CO1 group, remove all the stain (Uncheck) extensionIn the CO2 group, stain (check) 101.102 extension, and remove the stainext 103,104,105,106,107,108In the group CO3, remove stain (uncheck) extention 101.102, and stain(Check) all from ext 103 to 108.Note: to record a voice greeting message, default is on port 2,are for programming via digital keys on port 1
0 komentar:
Post a Comment